DIY Painted Kitchen Cart
A few months ago my husband ran across this cute little kitchen cart at a yard sale. He knew that I was looking for something like this for a corner of our kitchen/dining room area and so he grabbed it for me. I loved the little cart, but I felt that it was a little lackluster and didn’t go with the room so I decided to fix it up a bit. I recently got a new teal rug for the dining room so I decided to paint the base teal and use an antiquing wax to give it an interesting look. Our kitchen cabinets are a red oak so I purchased a stain for the top of the cart that matched this color.
Paint brush (These are supposed to be great)
Electric sander (Optional, but totally worth the $30 investment if you’re going to be doing a lot of projects)
I purchased my paint and wax from Michaels however for simplicity I have linked to products at Amazon.
The top of the cart is a butcher block and was a little worn so I went ahead and sanded the top down a little bit. I used a fine grit sand paper. After sanding I wiped down the piece thoroughly so that it was nice and clean and then followed up with a dry cloth.
I chose to start with the stain as I knew I’d be doing several layers. The stain I used stays on for 15 minutes and then is removed with a cloth. Read the instructions on your can in case it is different. Use painter’s tape (or washi tape in a pinch) to keep the stain off unwanted surfaces.
After staining I started painting the body of the cart. Originally I wanted the exterior of the drawer to be stained to match, however because the wood was different from the top of the piece the stain did not sink in well so I painted over it. I did two coats of paint and then did some touch up in a few places to make sure it was good.
I chose to use an antiquing wax on this piece to give it a distressed finish. It also muted the color a bit which fit my room better. I found this YouTube video on how to use the wax very helpful. Remember to read the instructions on your wax, with mine I went back the day after and buffed the piece to finish it.
The last step was to apply a clear coat of Polyacrylic to the top. This is a clear water based sealant that will protect the surface. You may want to do two or three coats of this.
Overall this was a great project and a great deal. We spent way less on this piece and the supplies as we would a nicely painted new version of this product and we got it in the color we wanted which looks great in the dining room area.